Bench for substitute players designed and manufactured to be used mainly in outdoor sports facilities. The bench consists of 2,25 m long side and central modules with a capacity of 4 VIP seats on each; combine the different modules to attain the required number of seats. The frame comes in squared cross-section steel pipe (cold dip galvanized, then painted in epoxy and kiln-dried). Robust 4 mm transparent polycarbonate sides and back sheets are attached to the frame by steel tapping screws on an aluminium section painted in the same colour as the frame. The modules are joined together using screws with a neoprene joint to make it waterproof. The front section of the bench is finished off with a round cross-section lengthwise cornice, which connects to the next module. Non-slip flooring in birch plywood bolted onto a rectangular cross-section steel pipe frame onto which 4 castor wheels (with brakes) are attached. (optional). VIP seats upholstered in imitation leather (UNE 1021:1-2). Polypropylene injected structure.